REPAIR PROCEDURE
- Increase the vehicle on a hoist.
- Drain the transmission. Refill it with Genuine Honda ATF Z1.
- Begin the engine.
- Along with your foot on the brake pedal, shift the transmission to D4
- Launch the brake pedal. Press on the accelerator,and bring the speedometer up to 50 mph. Ensure the transmission shifts through the first three lower gears and into fourth, and that the torqueconverter locks up.
- Apply the brakes to cease the front wheels.
- Shift to reverse, and then to neutral.
- Repeat the shifting procedure (steps four through 7)4 extra times.
- Flip off the engine.
- Repeat the above drain, refill, and shiftingprocedure (steps 2 through 9) two more times.
- Drain the transmission. Re install the drain bolt witha new washer. Refill the transmission with GenuineHonda ATF Z1.
- Disconnect the linear solenoid electrical connector.Remove the mounting bolts, then remove the linearsolenoid.
- Examine the linear solenoid mounting surface on the transmission. Remove any contamination.
- Install the brand new linear solenoid. Reconnect the electrical connector.
- Use the PGM Tester to erase any DTCs in the energy train management module (PCM).
- Check drive the car to examine the shift feel. If it nonetheless shifts harshly, install a remanufacture dtransmission
Read more and Download pdf : http://www.repairsetum.com/honda-civic-cr-v-harsh-shifting-automatic-transmission-automotive-repair
automanualcar 